The Morning Doo

[01tj]

You talkin for rear?? Don't do a 60.

Yeah, I've got my hands on a 79 Kingpin Ford front axle.

I think the biggest difference is you want to have an axle with spindles big enough to fit 35 spline. Some Dodges you can bore if they are not already 35 spline. Chevys can go either way whether they can be bored or not. And I think all Fords should either have 35 spline, or be capable of fitting 35 spline by boring the spindle.

I didn't even think of having to bore the spindle. I may end up having to go with a 14 bolt.

 

[matth_85]

Just do a 14 and shave it. That way you don't have to buy shafts

 

[LR Max]

Just do a 14 and shave it. That way you don't have to buy shafts

This. Cut the crap, then cut the crap out of it!

 

[97TJGUZZY]

The waterloo olympics....

http://www.liveleak.com/view?i=f2c_1354906505

holy crap, I just watched this.... what part of that did they think was a good idea?

 

[97TJGUZZY]

Yeah, I've got my hands on a 79 Kingpin Ford front axle.



I didn't even think of having to bore the spindle. I may end up having to go with a 14 bolt.

D70u for the win!!!

 

[cannonball]

Just caught some slack at a road block in ga for no tire coverage... Ridiculous

 

[97TJGUZZY]

[video=youtube;GbycvPwr1Wg]http://www.youtube.com/watch?feature=player_embedded&v=GbycvPwr1Wg[/video]

thought this was funny, it may be a drug induced funnay though

 

[Clemson5.9ZJ]

Just caught some slack at a road block in ga for no tire coverage... Ridiculous

Time for some badass 6" flares...

 

[LR Max]

Just caught some slack at a road block in ga for no tire coverage... Ridiculous

Let me guess, Hwy 76 near the boarder?

They stopped me there years ago. I thought for sure they were gonna search the truck...and leave all of my crap all over the side of the road.

 

[Jankoid]

It seems guzzy just won TJ of the month!

 

[VOLT]

Hells yea, thats awesome. You know I didnt really vote for the Duece son.

 

[97TJGUZZY]

thanks for the votes guys! for most of the last two days I didnt think I was going to pull it off.

 

[01tj]

thanks for the votes guys! for most of the last two days I didnt think I was going to pull it off.

Time for useless prizes!!

 

[Jankoid]

Marcus and Brooks, if neither of you need your MetalCloak discounts if be willing to take them off your hands free of charge.

 

[97TJGUZZY]

I was actually wondering if we could lump them together, I'll give you one of mine and you give me the other of yours so we each have $200 to a certain place instead of $100 to each... dont know if that will fly though.

 

[01tj]

I was actually wondering if we could lump them together, I'll give you one of mine and you give me the other of yours so we each have $200 to a certain place instead of $100 to each... dont know if that will fly though.

Ask 'em if we can...

 

[01tj]

Who makes the best 3 link upper frame bracket?

 

[97TJGUZZY]

If you run your joint with the bolt vertical its as simple as two tabs welded to the frame.

 

[01tj]

I run my bolt horizontal. The bracket ripped in half yesterday on mine. I see Ruff Stuff sells a pretty nice one.

 

[knobby97]

I'm in the process of switching from the vertical bolt style bracket (genright) to this adjustable artec upper bracket so I can mount the frame side of the link at that top end of the frame, and clear up some space for a 2 piece drive shaft bearing mount: https://artecindustries.3dcartstores.com/Adjustable-Inner-Frame-Bracket-single_p_295.html. The vertical bolt style puts my front upper link at an upwards angle, thus putting a lot of stress on that joint and limiting up travel movement.

I almost went with the ruff stuff dog legged link bracket, but it looked like it was going to be a little harder to modify for the position where I wanted to mount it.


Sent from my iPad using Tapatalk