Post your Picture of the day

won a rocking k cap wrench from the southeast overland Grand opening, here is how it fits on a scepter, anyone that has been out with me in the summer with the gas can knows how tight the lids can get sometimes. This thing should help a ton. And its delrin so it doesn't weigh a ton.

%5BUNSET%5D.jpg
 
Whats up with power strokes and rear ends blowing up? Paul told me his went kapow a few weeks back driving through a ditch.
 
It's Paul....need i say more? He went through like 4 10 bolts. But ford needs to get their sh*t together. If a 14b would work id put one in.
 
GreyZJ93 said:
It's Paul....need i say more? He went through like 4 10 bolts. But ford needs to get their sh*t together. If a 14b would work id put one in.
Click to expand...

I'd say its more of a Paul problem then a ford problem. That Dana 80 doesn't play. Dad has worked the **** out of his 99 dually truck and it is approaching 300k. Who is setting these rears up? Is he putting a good Dana gear set back in?
 
Paul's truck is loaded down with more tools then most shops have in them. I know he's had it loaded down and pulled his camper but the first time I know he wasnt pulling anything. The one he replaced it with came straight from a junkyard truck just swapped them out.

08 f350s came with Dana 80s? I was thinking they had a 10.5
 
Dunno about 08s I know the pre 98 trucks were sterling and all the 99 and ups I have paid attention to in a dual wheel are 80s
 
Steve97tj said:
Paul's truck is loaded down with more tools then most shops have in them. I know he's had it loaded down and pulled his camper but the first time I know he wasnt pulling anything. The one he replaced it with came straight from a junkyard truck just swapped them out.

08 f350s came with Dana 80s? I was thinking they had a 10.5
Click to expand...

f350 DRW came with dana 80s
 
Mine is a 99 F350 SRW. Im assuming it the same as what came in the F250's as well. I have seen several on powerstroke forums that have done the same, minus the pinion falling into the carrier. Yeah, Ford is probably doing something wrong but I know Paul has never been nice this his trucks (ford or chevy or jeep). haha.
 
jimbo92 said:
Cate did some gardening
View attachment 3117
Click to expand...

Been there, done that. LMAO! I think my neighbors got a kick out of it.
2678_1120959423229_670544_n.jpg


Here's my addition, from last weekend.
65634_4298333716425_1370525439_n.jpg
 
Also It wouldn't be a ford problem it would be a Dana problem. Getting axles from a junkyard means your probably buying somebody else's problem.
 
Chika chika yea boiiiiiiii. I am sending my converter out tomarrow. Hope I get everything back next weekend so I can work on it while i'm outta school.
 
When I got to my jeep after my last class yesterday I found this on my windshield:

32863D7A-8009-4874-8CA5-3AB7878E0EBB-2464-000001DEBAB7663C_zps37bf0cfd.jpg

So who was putting flyers on rigs in the USC GS lot yesterday?
 
You must log in or register to reply here.
Back
Top